Faema Emblema

Multi-boiler espresso machine with a display. Faults appear as a check-control number and are kept in an error log with the time and group status.

What it is: Espresso machine

Faema Emblema error codes

CodeMeaningLikely causeWhat to do
51Pressure sensor reading out of rangeSensor or board faultCheck wiring; replace the sensor or board.
52Boiler did not heat within 45 minutesSafety stat tripped, element open, or triac boardReset the stat; check element and wiring; replace the triac board.
53Turbosteam probe out of rangeProbe unplugged or wrong standard dataRe-enter the standard data; check or replace the probe.
58Boiler over-pressure (pressure-sensor machines)Level probe fault and boiler overfilled, or element always onCheck wiring and the level probe.
59Boiler refill took over 15 minutesNo water, fill valve, wiring or boardCheck the supply and fill valve.
66Irregular coffee doseNo water, flow meter, blocked circuit or wiringCheck supply, fittings and the flow meter.
67Group wash dispensing irregularAs 66, or group valveCheck the group solenoid valve.
96Maintenance dueService interval reachedCarry out maintenance.
98Error log and wash count resetLog was clearedInformation only.
99Default data loadedStandard data enteredInformation only.

Notes

For licensed technicians only. This equipment can involve mains voltage, high-voltage microwave circuits, gas and refrigerant. Isolate power (and gas) before opening panels, follow the manufacturer's manual and your local licensing rules (for example ARC refrigerant handling and electrical or gas licences). Wrong settings can spoil food or damage equipment. Check every value on the unit in front of you before changing it.

Based on: Faema Emblema manual (user and engineer sections), check-control messages. Always check the manual for your exact model and software version.

ServiceModes is not affiliated with Faema or any other manufacturer. Written in our own words from the manufacturer's documentation.

Back to top ↑