Nuova Simonelli Nuova Aurelia

Touch-display espresso machine. Alarms carry a code (type) and a sub-code (which boiler, group or board). The alarm icon on the home page shows the code number while an alarm is active.

What it is: Traditional espresso machine. Up to four groups, with E-Milk options.

Key combo: Tap the alarm icon on the home page to open the alarms menu. Alarms cannot be reset from this menu.

Nuova Simonelli Nuova Aurelia error codes

CodeMeaningSub-codes
1Filling timeout1 services boiler; 2–5 groups 1–4
2Heating timeout1 services boiler; 2–5 group 1–4 boilers; 6–9 groups 1–4; 10 cup warmer
3Probe short circuit1 services boiler; 2–5 group 1–4 boilers; 6–9 groups 1–4; 10 cup warmer; 11 hot water; 12 left E-Milk; 13 right E-Milk; 14 mains pressure
4Probe open circuitSame sub-codes as code 3
5Alarm history full1
6Data area load error1 software config; 2 recipes; 3 alarm history; 4 hardware config; 5 counters; 6 power-fail state; 7 hardware config
7Parameter out of rangeSame data areas as code 6
8Data area restored1 software config; 2 recipes; 3 alarm history; 5 counters; 6 power-fail state
9Data area modified7 hardware config
10External board communication1 optional board; 2 left E-Milk knob; 3 right E-Milk knob; 4 filter-holder magnetic reader
11Filter-holder magnetic reading1 system; 2 bus overload; 3 invalid power supply; 4–8 device sensors 5 to 1; 9 system (unspecified)
12System monitoring1 backup battery flat; 2 clock start
13Group cleaning due2–5 groups 1–4
14Maintenance due1 by cycles; 2 by date
15Mains water pressure below threshold1 mains pressure

How to enter service / parameter mode

  1. Tap the alarm icon on the home page (only shown while an alarm is active).
  2. The alarm list can also be opened with no alarm active.

Other useful key presses

TaskHow
Technical settingsMain menu → Technical settings, then enter the service password.
Group washIf the cleaning alarm is on, start the wash from the Services page.

Notes

For licensed technicians only. This equipment can involve mains voltage, high-voltage microwave circuits, gas and refrigerant. Isolate power (and gas) before opening panels, follow the manufacturer's manual and your local licensing rules (for example ARC refrigerant handling and electrical or gas licences). Wrong settings can spoil food or damage equipment. Check every value on the unit in front of you before changing it.

Based on: Nuova Simonelli Nuova Aurelia user manual. Always check the manual for your exact model and software version.

ServiceModes is not affiliated with Nuova Simonelli or any other manufacturer. Written in our own words from the manufacturer's documentation.

More Nuova Simonelli pages

Back to top ↑